RIKON Power Tools 10-305 Vs. 10-326 Vs. WEN 3962 Benchtop Band Saw

Are you seeking for a good quality bench top band saw? Then this might be what you’re looking for. See, many consumers end up investing in something they don’t really know, or don’t have any clue at all which may consequently lead to issues including overpaying.

And that’s why we’re here to offer you a much better insight into the capabilities of bench top band saw so that you can make a good purchasing decision and get the unit that meets expectations and requirements. What you want to do is take some time and check this review to make your purchasing experience much easier.

Now, without beating around the bush, here are the top 3 bench top band saw that will surely worth of your hard-earned money.

Read on!

RIKON Power Tools 10-305 vs. 10-326 vs. Wen 3962 Bench Top Band Saw Review

1. Rikon 10-305 Band saw With Fence, 10-Inch


Amazon-Button
What You Will Get With This Product?

Despite the fact that the cutting limit and power aren’t on a par within some other models, they do offer enough space for specialists to handle a little to moderate-sized venture without too numerous issues. The 10-305 model is basically a scaled-down version of the endlessly well-known 10-345 and 10-325 models. In any case, it offers less power and flexibility in contrast with those, but on the other hand, it’s essentially less expensive.

The principle bit of leeway of this unit is its size. It’s altogether littler than other units in this class meaning it’s an extraordinary solution for individuals who have constrained space. On top of that, it’s additionally very simple to store it when not being used. The edge is alright, yet it struggles with greater undertakings.

The Design

As we previously mentioned, the greatest favorable position with respect to the design is a little size and lightweight. Since this model gauges just around 68 pounds, one doesn’t need to stress over transport or storage. The unit likewise accompanies a tear fence included which isn’t an irregularity as such, however, it’s surely worth mentioning. The cast iron table is shockingly huge and it offers all that could possibly be needed space for smooth operation.

Motor Output

To the extent the motor power goes, it’s adequate for certain applications, yet it doesn’t hold well with regards to huge pieces. In any case, the unit isn’t anticipated for gigantic tasks; therefore, the underpowered motor doesn’t come as astonishment. The adjustable guidepost is a flawless addition, particularly on the grounds that it enables you to modify and tweak the tallness inside seconds on account of the advantageously positioned handle.

The casing is solid and dependable, yet it lacks dependability because of the absence of weight. Be that as it may, the base can be in a bad way into some sort of a help piece which mitigates the solidness issues altogether. The table can tilt from 0 up to 45 degrees which enables you to cut at a specific edge without bothering with torques.

Convenience

Its straightforwardness and usability are certainly two primary selling focuses. It doesn’t offer to a lot of intensity nor highlights, yet it’s as yet an average saw for generally DIY-enthusiasts. The tear fence is likewise a flawless addition and it’s to some degree uncommon in this value classification. Most other brands sell these additional parts independently.

Work Surface

The size of the worktable is one of the most wonderful astonishments. A unit that is a scaled-down version of its predecessor isn’t required to have such an enormous work surface. The controls are likewise effectively available and all handles and switches are positioned advantageously and inside reach. In other words, you don’t need to stress over personal time if the machine all of a sudden requires additional alterations.

PROS:

  • Comes with a micro adjustable guide post
  • Motor provides ample power for cutting bowl and pen blanks
  • Comes with a quality rip fence
  • Durable work surface
  • Solid steel design 

CONS:

  • Stability issues
  • Underpowered

Top FAQs on This Product:

Q: Can this saw cut thin strips of 1 ½ 2in hardwood?

A: You need a ½ inch 3T per inch blade.

Q: What is the limit?

A: Its maximum cutting depth is 4 to 4/8 inch.

Q: Does it work on 220V?

A: No, this is a 120V unit.

What Take on This Product:

Investigate the abilities of this model and on the off chance that you discover them alluring enough, don’t stop for a second to think about a buy. Then again, in case you’re looking for something that will yield steady results and won’t battle with greater ventures, then this model isn’t the thing you’re searching for. This unit is very explicit and it’s designed for an uncommon gathering of clients that don’t anticipate too much from a normal band saw. That doesn’t mean this item does not merit your time since we wouldn’t decide to review it, all things considered, however, we firmly suggest that you get acquainted with its abilities before contributing.

2. RIKON Power Tools 10-326 14″ Deluxe Band saw


Amazon-Button

What You Will Get With This Product?

The RIKON 10-326 is a standout amongst other bench top band saws available. It is conservative and the ideal size to have in a home workshop. You’ll get the outcomes you need regardless of whether you don’t have a great deal of room. On the off chance that you choose you to need to utilize this on a stand rather than a bench top, one is accessible however must be requested independently.

Affordability

One thing that stands out about this model is the cost. It’s the best worth in light of the fact that, in spite of the fact that you will discover some that are more affordable, you won’t get a similar exhibition from them. Additionally, with the RIKON 10-326, you get the brand’s restricted 5-year guarantee.

Performance

In case you’re searching for a model to take your carpentry to the following level, this is an extraordinary decision. It’s reasonably evaluated and performs well regardless of the way that it’s little enough to fit on top of your workbench. It just has a ⅓ HP motor, which is a little on the low side and could mean it will hinder with thicker, heavier types of wood. For most employments, however, this will be all that could possibly be needed capacity to oversee you as far as possible. It’s the best band saw for carpentry if that is all you’ll be intending to utilize it for.

 

PROS:

  • Extra tail rip fence
  • Quick-lock table Trunnion system
  • Incorporated with quick-adjust rip fence
  • It is spring loaded
  • Comes with three innovative, patent pending features 

CONS:

  • Doesn’t have multiple speeds
  • Adjusting table tilt can be quite difficult

Top FAQs on This Product:

Q: Can it be plugged into a regular wall outlet or does it take a special wall jack?

A: It is a regular three prong wall outlet, plug and play.

Q: Where’s the serial number?

A: It can be found on the backside above the blade tension lever.

Q: Does it come with a blade?

A: Yes, it comes with one blade.

What Take on This Product:

Most power tools are generally painted within yet this one is smooth to the touch. Dust doesn’t stick to smooth surfaces just as it does to harsh ones, so you’ll see significantly less dust collection inside the saw. Less dust rises to less time spent cleaning the saw and more opportunity for your work.

We were baffled that a miter gauge was excluded. Likewise, the blade that accompanies this tool doesn’t keep going long. Besides those two things, this was a solid contender for the top spot.

3. WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10″

WEN 3962 Two-Speed Band Saw with Stand and Worklight, 10"

Amazon-Button

What You Will Get With This Product?

The WEN 3962 Two-Speed Band Saw is for the most part made for carpenters and metal fabricators just as your ordinary construction specialist. It’s additionally utilized by those utilized in steel processes, the timber cutting industry, and so forward.

Performance

It seems a lot of utilization when chopping down long rails on the rooftop, conductor, and industrial bed racking and whatever else insofar as they’re work pieces you can bring over to the unit versus pipes and cylinders that are as of now installed. The WEN 3962 is a heavyweight (particularly the 14-inch model), however that lone method unrivaled cutting soundness.

The unit won’t wobble over the spot as you make your cuts. As far as we’ve seen, a considerable lot of the reviewers who’ve reviewed this band are mortgage holders and specialists who do carpentry and DIY home improvement as a side interest and professional metal fabricators or woodworkers.

The Design

The design is quite flawless and easy to use. The materials utilized in production are tough and dependable. Truth be told, most of the included parts are made of steel, aluminum, and other dependable metals. Therefore, one doesn’t need to stress over life span or steadiness. Discussing security, the included stand is one of the pivotal factors that guarantees smooth operation and nonappearance of wobbling.

The open worktable helps a great deal in case you’re anticipating preparing greater bits of wood. It enables you to cut vacation fundamentally and improve the general exactness of your cuts. The motor works at two distinct rates, contingent upon what you are cutting. Some other units can slice through certain metals because of the multi-speed highlight, however, this one isn’t predicted for such applications. It is anything but a totally unimaginable undertaking using any and all means, yet it’s not something that is prescribed by the producer.

Other Features

As we previously mentioned, there are many additional features that make this specific model stand out. Despite the fact that the LED light doesn’t appear to be a noteworthy addition by any means, numerous individuals welcome it nonetheless. It enables you to have a superior understanding of things that are right now occurring on the worktable. Additionally, it proves to be useful in case you’re as often as possible working under diminishing conditions.

The dust port is likewise an invited highlight despite the fact that relatively few individuals really set it to work. Then again, on the off chance that you possess a vac and like to monitor the flotsam and jetsam, this 3-in-1 dust port will surely make things a lot simpler.

The fence and miter gauge are to some degree standard pieces, despite the fact that there are a few models that come without these included. On top of that, the majority of those models are comparatively evaluated as this one, which implies that this one offers somewhat more in contrast with its competitors.

 

PROS:

  • Comes with a miter gauge, a fence, a 3 in 1 dust port, and more
  • Operates at two speeds of either 1520 or 2620 FPM
  • Spacious cast aluminum work table bevels up to 45 degrees
  • Uses 72 inch blades anywhere from 1/8 to ½ inches in size
  • 5 amp motor creates cuts up to six inches deep 

CONS:

  • Frustrating to adjust and set up at times
  • Its 9 inch and 10 inch variants are quite flimsy

Top FAQs on This Product:

Q: How to make it cut a straight line?

A: The best way is to use the fence and pusher that it comes with.

Q: What is the horsepower rating of the motor at 120 VAC?

A: 1/2 horsepower if motor is running at 90% efficiency.

Q: Will this cut steel?

A: With a metal cutting blade, yes. 

What Take on This Product:

In case you’re on a restricted spending plan, we suggest that you investigate this specific model. It’s positively not the best thing available using any and all means, yet its cost to-quality proportion is quite great. In other words, you most likely won’t discover a fundamentally preferable unit over this for a similar measure of cash. The included features are great and you can depend on them more often than not. The machine is to some degree reliable with regards to smoothness and execution, however, it can occasionally battle with certain assignments. By and large, it’s a commendable venture as long as you don’t abuse it. 

What is the Difference between RIKON Power Tools 10-305 vs. 10-326 vs. Wen 3962 Bench Top Band Saw?

Usability

Unlike RIKON 10-326 and Wen 3962, the RIKON 10-305 is designed for carpenters and it doesn’t do well with other materials. Therefore, in case you’re searching for something that is especially flexible regarding the material decisions, this isn’t the thing for you. Truth be told, regardless of whether you’re hoping to handle a major venture, we wouldn’t suggest getting this specific model as it will in general battle with demanding errands.

Versatility

The RIKON 10-326 is a standout amongst other bench top band saws available including the RIKON 10-305 and Wen 3962. It is conservative and the ideal size to have in a home workshop. You’ll get the outcomes you need regardless of whether you don’t have a great deal of room. On the off chance that you choose you to need to utilize this on a stand rather than a bench top, one is accessible however must be requested independently.

Performance

The Wen 3962 is a go-to solution both for DIY-enthusiasts and a few professionals that both RIKON 10-326 and 10-305 can’t offer. The 3.5-amp motor yields enough capacity to slice through wood gracefully. The machine is anything but difficult to utilize, accompanies two or three valuable features, and above all – it’s financial limit benevolent. The incorporated additional accessories are what make this unit stand out in contrast with some other ones that are in a similar value go. The included LED light, miter gauge, stand, and dust port are on the whole extraordinary accessories that ease a portion of the problems.

Final Thoughts

The three bench top band saw that we covered offer consumers something unique to their users. All of theme feature powerful motors as well as portability and ease of use. Remember that there are a number of things you must consider and care about before selecting the model for your needs.

Remember that one important thing you must not forget is not to rush your buy and not to restrict your budget a little bit too much. You see, limiting your budget can usually lead to bad decisions which consequently end up with injuries. In short, don’t attempt to invest in some cheap copies since they normally do more harm than good.

Anyways, if you found this review helpful, please leave a comment down below and we’ll get back to you ASAP!

Leave a Reply